Fuel Gas

Flushing the system of gas turbine fuel gas before putting in power plant?

I'm working on the washing procedure of the gas system gas turbine fuel. Before connecting the gas lines to fuel distribution system is necessary to remove the lines with nitrogen or gas fuel. We concluded that our internal meeting after washing the fuel gas lines, we must check for the cleaning of fuel gases just before that the fuel distribution system by the method of the target board. I wonder which is the standard way to do this test. What should be the N2/fuel gas pressure. What is the size of the target board. and what size Dent acceptable, what is the material used to target etc. Can someone help board?

I was responsible for washing gas, and many lines of fluid in the process of setting up processing plants. It has been my experience that regardless of what manufacturers or others might recommend, speed is the key to ensuring a smooth start. It is necessary to eliminate at a speed of at least 20 to 30% higher than any speed that were experienced during the operation. If you download at low speeds, there can be particles trapped in lines shall not be evicted until the start of the operation.

Fuel Gas

Fuel Gas