Alcohol Stoves

How do gelled fire starter for wood burning stoves alcohol ..?

Make Your Own Fuel Alcohol gelled - Canned Heat Extreme do it yourself "can make your fuel gelled at home with the mixture of alcohol and calcium acetate (C4H6CaO4). The following instructions and measures are in the School Montville Senior Departmental Science. Add 25 g of lime or crushed egg shells (calcium carbonate CaCO3) to 100 ml of water and vinegar (acetic acid - CH3CO2H) and stir for about 5 minutes. must produce carbon dioxide (CO2), calcium acetate (C4H6CaO4) and water (H2O) plus leave you with some odds and chalk (CaCO3). If you are guessing how much chalk to add, make sure there is a little more after 5 minutes of agitation. Remove excess lime by filtration through mix a bit of filter paper (coffee filter or napkin can be used). SET a funnel into a jar, place the filter in it and pour the suspension through she. Check the level of their solution in its container and let the solution evaporate half of this volume to remove excess water. Place your solution in an oven at low heat or put it in the sun to dry. If you went to far - just add water shortages. Note - You can dry your solution completely and save the rest of acetate dry calcium for future use. If the solution is not in the container you want the gel, and then pour there now. Add 30 ml of alcohol (ethanol, methanol or isopropanol) for their solution and see how to gel. Do not stir. Once the total reaction, pour any extra fuel. Y2kSurvivor suggests: Dissolved proportion of acetate calcium solution: 1 part dry calcium acetate (by volume) to 2 parts water solution-Fuel: 1 part calcium acetate solution dissolved in alcohol, 4 parts See also: Canned Heat: Alcohol Gels - University of Wisconsin, Canned Heat alcohol gel - Chem matter Canned Heat: Sterno - Normal Community High School

Alcohol Stoves

Alcohol Stoves